Best loaded subwoofer boxes for 2025 (2024)

Loaded subwoofer boxes are, in my opinion, the most fun car audio system upgrade. A car stereo without bass is like a taco without the salsa: I'll still enjoy it, but something's missing. A good subwoofer brings the spice back to bland tracks by adding powerful low end.

What is a loaded subwoofer box?

A loaded subwoofer box is a subwoofer that has been installed into an acoustic enclosure (see also, box). What a satisfying answer, right? To give you some clarity, I have to get a little technical.

Buckle up, buckaroo. I LOVE getting technical. (or run away: jump ahead to the first sub)

What is a ported or sealed subwoofer?

A ported box creates a booming bass experience; the box itself becomes what acoustical engineers call "resonance chambers". If you're familiar with how guitars work, you know that that the hole in a guitar behind the strings affects the sound quality as much as everything else.

A sealed box will recreate bass without necessarily using space to make the bass "bigger".

For the technical info on this topic, check out Crutchfield soundman Buck's article on sealed and ported subwoofer enclosures.

What should I look for when buying a subwoofer for my car?

The single, hands-down, most impactful feature to think about is: space. You can change the sound with an amplifier, but the amount of space you want to work with will always be limited. To install a loaded subwoofer enclosure, you need to find out how much space you're working with, and that's the one variable you can't change. Hence the tape measure.

Why we recommend these subwoofer boxes

Some of these are customer favorites top sellers rating 4 or 5 stars on our site. Others are boxes that we think have something special to offer. Either way, read on for our picks for the best loaded subwoofer enclosures.

1. The driver-centric underseat subwoofer — the Focal ISUB TWIN

Compact underseat subwoofers with specially-designed drivers

This ultra-compact, underseat subwoofer set is meant to play beneath the front seats. This new subwoofer system from Focal is a completely driver-centric way add bass to your sound system. The ISUB TWIN commands a niche all to its own: fitting inside vehicles with just a little space under the front seats.

Dual 100-watt subwoofers

The ISUB TWIN contains two loaded sub boxes, and each box has a small footprint. Each box can handle 100 watts RMS, but they are 2-ohm subs, so you’ll need to power them with two separate amplifier channels. They are extremely compact, less than 3-1/2 inches thick, and you slide them underneath the driver's side and passenger's side seats, with the screened side pointing the sound toward the front of the vehicle.

Specifications

• dimensions: 10.2"W x 3.14"H x 9.44"D
• power handling (each): 100 watts RMS (200 watts peak)
• impedance: 2 ohms
• sensitivity: 83 dB
• enclosure design: sealed

Install without modifications

These slick little boxes come with hook and loop fasteners that stick to the carpeting in your car. There are also screw holes for attaching them to the floor if you want a permanent placement.

According to Focal, these 2-ohm subwoofers are a great match for the compact Impulse 4.320 amplifier.

Check out our full selection of underseat subwoofers.

2. The truck owners' favorite — Alpine R2-DB8V-TRK

Ported dual subwoofer enclosure with two 8" R2-Series subwoofers.

Alpine's Halo Series is wildly popular amongst truck modders, and they made an excellent fit with these two 8" subwoofers. You install them underneath the rear passenger seats, so you won't lose any important storage space and the subs get some protection in their concealed location. Customers say they hit like 10" subs, look great, and are easy to install.

Specifications

• dimensions: 51" W (max)/40" W (min) x 8.63" H x 14" D
• power handling: 750 watts RMS
• impedance: 2 ohms
• sensitivity: 84 dB
• enclosure design: ported, side firing

Truck owners who installed the Alpine R2-DB8V-TRK are enthusiastic about the fit and sound:

Pair these sub boxes with a 750 watt Alpine subwoofer amplifier. For more of Alpine's legendary sound, check out more Alpine subwoofers.

Think this might be the sub for you? Contact our advisors to find out about fit and pairing with your truck.

3. Subwoofer with remote controlled party lights — Alpine S2-SB10

PrismaLink™ S2-Series sealed subwoofer enclosure with 10" subwoofer and RGB lighting

The Alpine S2-SB10 is a big 10-inch subwoofer sealed inside a low-footprint wedge, made to sit in the trunk behind angled passenger seats for a versatile driving and tailgating experience. Link up as many as four other SB10 subwoofers with the optional KTX-LK10 bracket to create a wall of subwoofers in your trunk. The subwoofer box comes with a remote control, so you can control the LED colors and patterns.

If you need to upgrade your receiver as well, the Alpine ILX W670 S2 SB10 package includes both the subwoofer box and a receiver that has Android Auto™ and Apple Carplay®.

Specifications

• dimensions: 14.5"W x 13"H x 11.25"D (Upper) x 5.5"D2 (Lower)
• power handling: 600 watts RMS (1800 watts peak)
• impedance: 2 ohms
• sensitivity: 85 dB
• enclosure design: sealed

Want party lights with more bass? There's a 12-inch version available. Check out the Alpine S2-SB12.

4. Down-firing subwoofer box — Kicker 49L7TDF122

Sealed, downward-firing enclosure with L7T 12" shallow-mount square subwoofer

A down-firing sub can be a great choice for solid bass in a compact package. It's also convenient if you want a sub you can mount in cargo areas. This down-firing sub has extensive internal bracing Kicker’s classic "Solo-Baric" design of the subwoofer itself increases the cone area, moving more air and creating louder and deeper bass than you'd expect in such a slim, sealed box.

Kicker has a loyal fanbase in the rock, metal, and EDM communities. The 12" woofer paired with the square design get you frequencies down to 25 Hz, so it's a dream for space-conscious bass-heads.

Specifications

• dimensions: 23.88"W x 6.63"H x 15.13"D
• power handling (each): 600 watts RMS (1200 watts peak power)
• impedance: 2 ohms
• sensitivity: 86.1 dB
• enclosure design: sealed

If you want to take it up a notch, you can get this hard hitting square subwoofer in a ported box. Check out the single Solo-Baric ported Kicker subwoofer and the double Solo-Baric ported kicker subwoofer boxes.

5. The rugged, all-weather sub — Kicker 46CWTB102

Weather-proof sealed tube enclosure with one 10" 2-ohm subwoofer and 10" passive speaker

Mount it upright or sideways, stick it in a car, on a boat, mount it to the roll cage of a UTV and feel some serious bass. It includes a 10" subwoofer and a second unplugged subwoofer, aka passive radiator, that amplifies the bass without consuming power or adding noise The best part? It's made of weatherproof materials. With a ceramic magnet, santoprene rubber surround, and polypropylene cone, it'll be ok to leave the top down.

Specifications

• dimensions: 10-5/8"W x 16-9/16"D
• power handling: 400 watts RMS (800 watts peak)
• impedance: 2-ohm
• sensitivity: 85.7 dB
• enclosure type: sealed with a passive radiator

There is a budget version of this 10" subwoofer as well: Kicker 46CWTB84 with 8" subwoofer and passive radiator.

6. Fits inside your spare tire — JBL Stadium BassHub

Sealed enclosure with 11" dual 4-ohm voice coil subwoofer

In most coupes, sedans, hatchbacks, and vans, the spare tire sits under a concealed panel in the trunk. JBL came up with a cool design that actually mounts to the top of the spare tire and fits snuggly inside, underneath the carpeted panel. You turn the spare tire upside down and install the sub inside the rim of the tire. It has a plug-in harness so that you can easily remove it if you actually need to use your spare tire.

Specifications

• power handling: 600 watts RMS (1200 peak)
• impedance: 2 or 8 ohms
• sensitivity: 90 dB
• dimensions: 6.5"H x 14.13"D
• enclosure design: sealed

Note: your spare tire post needs to be removable for this to work. If it's welded to the chassis, you would have to remove it to make this work.

If you need an amp that you know will pair seamlessly, JBL offers a package deal with the 11" Stadium Basshub and the A600 Club series 600 watt amp.

7. Best dual sub to shake your mirrors — JL Audio CP212-W0v3

BassWedge™ slot-ported enclosure with two 12" W0v3 subwoofers

The JL Audio CP212-W0v3 dual subwoofer setup is a beast. With two 12" subwoofers in a carefuly designed enclosure, you have positioning options: fire the woofers downwards, towards the front, or towards the rear.

Specifications

• dimensions: 31-5/8"W x 15-1/4"H x 20-5/8"D1 x 16-5/8"D2
• power handling: 150-600 watts RMS (1200 watts peak power)
• impedance: 2 ohm
• sensitivity: 86 dB
• enclosure design: slot-ported box

JL Audio is one of the most prestigious makers of subwoofers in the US, and they’ve spent years refining their slot-ported sub box designs to enhance bass response and improve performance. With a power handling of up to 600 watts RMS and frequency response from 22 to 250 Hz, this is one of the most versatile sub boxes available today. Best choice for the person who prefers sound over trunk space, though for the sound it takes up very little space.

See other loaded subwoofer enclosures by JL Audio.

8. Shallow subwoofer — Rockford Fosgate R2S-1X10

Sealed truck-style enclosure with one 10" Prime subwoofer

Rockford Fosgate's R2S-1X10 shallow loaded sub enclosure is a rugged and affordable option that can create punchy bass in small, tight areas. It's front (or rear) firing, so you can orient it against the back of a seat or slide it in a storage bin in the back of your truck, and the slim box won't take up too much leg room in the back.

Specifications

• dimensions: 19-1/8"W x 13-1/2"H x 5-1/4"D1 x 3-1/4"D2
• power handling: 100-200 watts RMS (400 watts peak power)
• impedance: 2 ohm
• sensitivity: 83
• enclosure design: sealed

See more of our Rockford Fosgate loaded subwoofer boxes.

9. Best bass on a budget — JL Audio CP110-W0v3

Slot-ported enclosure with one 10" 4-ohm subwoofer

It definitely feels weird to put a JL Audio sub as a budget pick. JL Audio refines and tests high-end audio for booming car bass. Their sound designers have many decades of experience developing boxes with complicated structures to make a single 10" subwoofer that can handle a ton of power and generate slamming and accurate bass in a small package.

Specifications

• dimensions: 15-5/8"W x 14"H x 17-5/8"D1 x 13-5/8"D2
• power handling: 75-300 watts RMS (600 watts peak power)
• impedance: 4 ohms
• sensitivity: 84 dB
• enclosure design: slot-ported box

Pair it with a JL Audio mono subwoofer amplifier.

If you'd like an even better fit, be sure to check out our vehicle-specific subwoofers

How do I choose a good loaded sub box for my car?

Again, think about fit first, sound second. Once you decide how much space you have to work with, it's much easier to find a box that fits the dimensions you have. Then consider the type of sound you want after that.

A good loaded subwoofer box is engineered to create bass sounds.

An engineer (or a person who prefers words like "chamber" and "enclosure") took the time to measure invisible sound waves behind a subwoofer to figure out how they'll bounce inside that box. Almost any "unloaded" subwoofer could be made to sound "tight and punchy", or "loud and boomy", and that's based entirely on variables such as the shape, size, air flow, how well the box is sealed, the materials from which they build the box, etc. Let the sound engineers of any of these highly qualified brands do that work for you.

For most people, a loaded sub box is the most convenient choice

When you get a loaded sub box, you can skip the step where you become a sound engineer and invent your own "acoustical resonance chamber". And if you decide later you DO want to build your own, guess what, you can literally take the subwoofer out of the box it came in and build as many housings as you want.

Even builders and mechanics buy loaded subwoofer enclosures

Despite the fact that I have 8,000+ hours of experience building fancy wooden and veneered MDF boxes, I recommend getting a loaded box over building one. Decades of refinement go into these sub box designs to create the ideal bass box for a specific subwoofer.

If you have any questions about compatability or choosing a subwoofer, contact our Advisors via phone or chat.

Take a look at the rest of our best-selling and top-rated loaded subwoofer boxes.